Language
Currency

ZXY6010 ZXY6010S constant regulated 60V 10A 600W DC-DC power sup

  1. Home Monitor power supply ZXY6010 ZXY6010S constant regulated 60V 10A 600W DC-DC power sup
  • img

ZXY6010 ZXY6010S constant regulated 60V 10A 600W DC-DC power sup

Monitor power supply
ratingimage
0 Reviews Add Your Review
In Stock
£56.07

  010x external expansion interfaces are described in detail:
ZXY6010D / S interface position layout:

 

9.jpg

Expansion of ZXY6010D / S Interface Description: ZXY6010D / S, has a rich expansioninterface, as follows
 
 
No. 1.: J4, switch expansion interface, J4 external power switch on the board must be placed in the OFF state.
 
 
 
2. No.: J12, the left side of the small box from the left to right P1: com, P2: ↑ keys, P3: ↓ keys, P4: <> / M button, P5: the SEL button P6: OUT / OK button.
 
 
3. No.: J6, on top of a small box from the top to bottom P1: pin of encoder P1, P2: encoder com, P3: encoder P3 pin.
 
No. 4.: J3, from the small box on the right from right to left P1: OUT + P2: OUT-power output of lead, disconnect JUMP1, the JUMP2 short-circuit point.
5. No.: J2, left a small box from the left to right P1: CV + P2: CV-, P3: CC + P4: the CC-, P5: OUT +, P6: OUT-. Corresponding OUT indicatorwhich resistor R25, R27 corresponding CV lights, R28 corresponding the CC indicator, change the size of the three resistance, adjust thebrightness of an external indicator.

 

  010x external expansion interfaces are described in detail:
ZXY6010D / S interface position layout:

 

9.jpg

Expansion of ZXY6010D / S Interface Description: ZXY6010D / S, has a rich expansioninterface, as follows
 
 
No. 1.: J4, switch expansion interface, J4 external power switch on the board must be placed in the OFF state.
 
 
 
2. No.: J12, the left side of the small box from the left to right P1: com, P2: ↑ keys, P3: ↓ keys, P4: <> / M button, P5: the SEL button P6: OUT / OK button.
 
 
3. No.: J6, on top of a small box from the top to bottom P1: pin of encoder P1, P2: encoder com, P3: encoder P3 pin.
 
No. 4.: J3, from the small box on the right from right to left P1: OUT + P2: OUT-power output of lead, disconnect JUMP1, the JUMP2 short-circuit point.
5. No.: J2, left a small box from the left to right P1: CV + P2: CV-, P3: CC + P4: the CC-, P5: OUT +, P6: OUT-. Corresponding OUT indicatorwhich resistor R25, R27 corresponding CV lights, R28 corresponding the CC indicator, change the size of the three resistance, adjust thebrightness of an external indicator.

 

Quantity : 21